This brief overview explains how to assign or update a production on a device set to ‘Offline-USB mode’.
Go to the Device Manager and select the device from the list on the far right column. You will notice the device is set to offline USB mode.
With the Message On-Hold tab selected, open the MOH Productions list on the right to find the production you’d like to use. If you’d like to create a new production at this point you can do so by clicking the ‘New Production’ button at the bottom of the list. Once you’ve found your production, drag and drop it in the default production area. Click Save.
Save the production file, Spectrio_USB_Update.cs to your flash drive.
Once this is done, simply insert the flash drive into the player’s USB port to load the production to the player. The Hotspot light will flash blue while loading, and will turn solid once it’s done.
Remove the USB Flash drive from the device to begin playing your message. If you would like to listen to the production on the device, set the Monitor Speaker switch on the front of the device to Zone 1. Note: It may take a few minutes before you hear the audio playing.